5 Channel Sequencer runs on 4 AAA batteries. Rated for 5 lengths of up to 5 foot long EL wires. It has 8 programs, with two speed settings. Perfect for costumes or displays.
IT 9361 5 Channel Sequencer runs on 4 AAA batteries. Rated for 5 lengths of 2.5 feet long EL wires (people routinely run up to 7 feet per channel, you trade battery life and brightness.) It has 8 programs, each with two speed settings. Perfect for costumes or displays. Dimensions: 2 1/8" x 3 1/4" x 3/4", Weight: 2 oz. PINOUT: 1 - Common, connect to all of the EL wire center conductors same as pin 7. 2 - Line 1 connect to 1st EL wire's hair wires. 3 - Line 2 connect to 2nd EL wire's hair wires. 4 - Line 3 connect to 3rd EL wire's hair wires. 5 - Line 4 connect to 4th EL wire's hair wires. 6 - Line 5 connect to 5th EL wire's hair wires. 7 - Common, connect to all of the EL wire center conductors same as pin 1. Wires 1&7 on the ribbon cable are COMMON, you can connect one or both of them to, say, all of the center conductors of your EL-Wire and then use wires 2-5 to connect to each individual EL-Wire. This unit does not come with the mating 1/10 inch spacing pin header. Most users of this sequencer cut the end off and connect direct to the EL wire.
5 Channel Sequencer runs on 4 AAA batteries. Rated for 5 lengths of 2.5 feet long EL wires. It has 8 programs, each with two speed settings. Perfect for costumes or displays. Also has a DC jack, mate with a 5vdc 550ma 1.7mm plug wall transformer. Dim: 2 1/8" x 3 1/4" x 3/4", Weight: 2 oz. The fast/slow button is a toggle switch that steps/advances through the patterns and speeds.
|